Italian Marble Designs For Flooring !

When guest attain to our showroom, they usually demand to show low cost Italian marble for the marble flooring?

But indecisively guest have no certain ideas, Do they looking for Italian Marble or Turkey or Chinese Marble?

Our sales person provides them better material as per their budget with good marble flooring ideas .At very soon, our company consider to launching highly appreciable Virtual Room Showcase to clear customer indecisive notion towards marble.

By our Dr.Marble Section in our website, we receive some enquiries by guests for marble flooring, I am disclosing few of it .It will definitely help you to get better ideas for marble usage on your flooring.
Dr Marble,

I am seriously considered to using granite or marble as a flooring material in an upcoming building project. Will they both perform in same manner? How about stain resistance, durability and handling?

Firstly I would like to appreciate you on your taste and choice of building material. Both Granite and Marble are admirable for flooring. In fact in a market these material recorded explosive growth during 4-5 years. Italian and other imported marble sales explosively grown approximately 400 percent during the past 3 years.

Home owners are using marble for flooring and granite as countertops, back splashes, tub platforms and surrounds and fireplace surrounds and hearths.

View of experts on Stain resistance:

Because granite and marble are natural products, they exhibit a wide range of stain resistance. Marble is more porous than granite. Certain marbles can stain quite readily. Common household liquids such as orange juice, nail polish remover, shampoo, and even water can cause serious stains in certain marbles. Granite, on the other hand, is very stain resistant. Professional installers recommend the use of neutral pH breathable sealers for both marble and granite, once they have been installed. These sealers need to be reapplied on a regular basis, depending upon how much use or foot traffic that the marble or granite is exposed to.

If you would like to use marble for an entrance ante-room, it might have to be professionally cleaned and resealed every 2-3 years depend on footfalls.
Marble used in bathrooms and kitchens should be cleaned and resealed every 15 months to 20 months.

I hope this article may help home owners to select better material for their marble flooring. To Get Beautiful Marble Flooring Designs, Visit on our website rmrmarmo.com with 100s of varieties of Italian and Imported marble.

You can ask any question online on our Dr.Marble Section or visit our showroom in Delhi to Buy Italian marble.

Parquet Flooring London L Must Do Before Installing A Wood Floor

After working with wooden floors for 14 years, I would like to explain what a carpenter or wood floor fitter must do before fitting a wooden floor. This is relevant to any wood floor.

What is the most important thing you should know about installing a wooden floor?

First is to check the dampness of your sub-floor, which I’ve talked about before.

Second is acclimatisation.

The wood must be acclimatized inside the room or house before installation. Parquet flooring must be acclimatised for a minimum of two days. Engineered flooring must be acclimatized for a minimum of two days. Multi-floor flooring must be acclimatised for a minimum of two days. And solid wood floor must be acclimatised for a minimum of four days.

These are very important steps for the future life of wood because your wood floor planks and boards can expand and rise in the future. Make sure you acclimatise your wood before installation, so you don’t regret it later.

Preparation is a crucial step.

Imagine if the wood floor isn’t acclamatised and it’s installed fresh from the packaging to your floor. It might look new and fresh in the beginning, but because it hasn’t been in the environment it’s supposed to get used to, it’ll start adjusting to the humidity and temperature of its environment while it’s on the floor. That means the wood will begin to contract and expand. And when there’s furniture on top of it and people walking, that will exacerbate the problem. Depending on the toughness of the wood and the indoor temperatures, you could see the wood floor begin to separate and rise anything from a month upwards after installing your new floor. There’s no use replacing just the few planks that start rising, as the rest of the floor will do the same given a bit of time. That means the whole floor will need to be replaced. That’s not a headache you want to have to deal with. The costs involved in replacing the floor will be huge. A quality wood floor lasts for many many years if installed properly, so it’d be a real shame to rush the job and install it in the shortest time possible. That’s why an experienced carpenter or fitter is crucial. Make sure it’s a wood floor specialist that installs your wooden floor.

If you want more advice, including how to find the best wood floor company, visit ParquetFlooringLondon dot com.

A Lay Person’s Guide To Refinishing Furniture

One of the most common means of furniture restoration is furniture refinishing. Refinishing furniture can breathe new life into pianos, tables, chairs, cabinets, bookcases, jewelry boxes and other items that have started to look a little bit worn.

With any furniture restoration project – and furniture refinishing is no exception – there are a few things to consider. First, you want to think about whether or not you can do it yourself. You may be thinking, “Why couldn’t I tackle furniture refinishing myself? All it takes is a few hours, some sandpaper and new stain.” While in many cases this is true, some furniture restoration should be left to the pros.

For example, piano refinishing isn’t the same as refinishing a jewelry box. Many large pieces – pianos, armoires – are far easier for professionals to restore and refinish. Another furniture restoration project that may be better suited for a professional is refinishing chairs. You may find that, for these projects, hiring a professional will cost less and take less time than if you were to do the projects yourself.

Another professional who you may want to consult before taking on a furniture restoration project is an antiques appraiser. While refinishing furniture you bought new can help give the piece more character or even help you to sell it for a profit at a yard sale, there are rare and collectible pieces of furniture that will lose value if they are refinished. When you’ve bought an antique dining room table, coffee table or cabinet, furniture refinishing could lower the value of the piece and you may want to look into a thorough professional cleaning instead.

If you are only looking at refinishing furniture that is newer or that has sentimental value, you may choose not to consult with a professional. In that case, it’s often best to get right into the project on your own.

To start your furniture-refinishing project, it’s often best to find a spot that won’t be noticed as a test site. In this spot – low on the back of the piece or on the bottom – you’ll want to start the furniture refinishing by removing a small portion of the current finish. Doing so will let you see what you’re up against and how hard will it be to remove the current finish from the furniture.

The answer to that question will vary some. Simple surfaces like a table will be easier to refinish than a cabinet with intricate corner work. Using a furniture stripper and a scraper will make it easier to remove a painted or varnished finish than merely using sandpaper. Once you’ve determined how to best remove the old finish from the furniture, the next step is to work outdoors (when possible) to remove the old varnish and paint.

Furniture refinishing, however, is not just about removing the old finish. Refinishing furniture requires stripping the old finish and then preparing the surface for a new finish by sanding the surface and wiping down the sawdust that sanding stirred up. Only after the surface has been prepared can you start the final step in this furniture restoration project: applying the new finish.

Refinishing the furniture, therefore, means knowing what the new finish will be. For some, the goal of refinishing furniture is to strip off color, get back to the natural wood and apply a clear finish that shows off the item’s natural beauty. For others, furniture refinishing is a matter of taking the wood to a darker shade – staining pine so that it takes on the color of cherry or mahogany wood.

Still others look at furniture refinishing as a chance to bring color to their table, desk, bookshelf or bureau. When refinishing furniture, many are likely to choose a colored stain followed with a topcoat of varnish for sheen. Another common choice people, who are looking for color, make is to select paint that matches the room or provides the contrast they are looking to achieve in their room.

Furniture restoration, after all, is a personal choice. Refinishing furniture gives you a chance to create a new look without going out and buying something new. For those inclined to take on little projects on their own, refinishing furniture can be a great way to spend a weekend – and have something to show for their time, for years to come.

Modular Kitchen The Trend In Designer Kitchens

Modular kitchen is a designer kitchen made by arranging a number of modules to increase the space and efficiency of the kitchen to the highest extent. The different types of modules in a modular kitchen include kitchen cabinets, worktop, chimney and all the other electronic and mechanical appliances used in a kitchen.
Because of its functional and spatial efficiency, modular kitchen is considered as one of the most effective designer kitchens by interior designers from around the world. As it betters the look, neatness and tidiness of the kitchen, most of the modern families who goes for a kitchen renovation mostly prefer the model of modular kitchen. Another reason for this high popularity for this type of kitchen is that the assembling and arrangement of the module helps the house to pose a better look. This is so because the modules are selected in such a way that it goes well with the overall look of the house.
Another important reason for its high popularity is the reduction of time spent in a modular kitchen. As it increases the time management through its efficiency, most families of the modern times prefer modular kitchen over the other options.
The arrangement assures you that all the kitchen equipments are safe and secure and wherever necessary, a plug point is provided so that all the electronic equipment can work perfectly well. All the things are arranged in accordance with maximum functionality while not overlooking the tidiness of kitchen. The positioning of ventilators assures freshness throughout the kitchen and this help in turn increases the efficiency of the kitchen user because time spent on cleaning the kitchen is less.
A wide range of modular kitchen designs is available from which you can select the look that you need your kitchen to have. It is available in different colours and different awesome natural shades. The look of the kitchen can go well with the look of the house without compromising how well your kitchen works. This is one of the reasons for its ever increasing popularity.
Modular kitchen is really a life changer. It totally increases the efficiency of your life, through your kitchen. It is available in different budgets and as it is made of different modules, onetime payment can be reduced by buying modules in different instalments. Modular kitchen, as the most popular and efficient kitchen design, is the ongoing trend in designer kitchens.

Furnace and Heater Maintenance Maximizing Energy Efficiency

Most likely the type of heating system you have in your home is a forced air system. This type of system typically will continue to run smoothly with regular maintenance. Without regular maintenance, your furnace can quickly wear out. Maintaining your furnace should cost you around $100 a year, if not less. This is definitely more favorable than replacing the whole system. Proper maintenance will also keep your furnace operating efficiently. Efficiency is key to saving money on heating bills since heating accounts for about one-third of your energy bill. However, the biggest motivation for having your furnace serviced regularly should be safety. Your home furnace could be a source of a carbon monoxide leak if not properly maintained.

The number one thing you can do to keep your furnace in top working order is to clean it regularly! If you hire someone to do the job they will replace the air filter and clean the filter system, motor, and blower. If youre cleaning the furnace yourself, you may use a toothbrush to clean the fan blades and any other small areas accumulating dust. Before providing any maintenance on your heater be sure to switch off the power to the appliance by locating a switch. Also, do not forget to shut off the gas to the furnace by locating the knob near the gas line. The gas line is a black pipe that will be connected to the furnace. Turn the knob so that it sits perpendicular to the line to shut it off. It is now safe to open the furnace door, and vacuum in all the crevices your vacuum attachment can reach. Remember to vacuum out the base and around the base of the furnace. Try to remove as much debris and dust as possible. After cleaning the actual unit, make sure the area around the furnace is clean and clear of clutter as well. Never store any flammable liquids nearby or even in your furnace room.

Once all debris is removed, remove the old filter and replace it with a new one. The filter on your heater should be replaced monthly during the heating season. Continue to check all fan belts. The fan belts help the furnace blower operate. If you ever find that your furnace is running but heat is not being pushed through the vents, check for broken or worn fan belts. Replace any that look frayed, cracked, or worn. Check the tautness of the belts by pushing on the center of the belt. If the belt gives in more then an inch, the belt needs to be tightened by adjusting the the attachment bracket. If at any point you smell a gas leak, this is a serious problem. Do not continue to work on the furnace but leave your home and report the gas leak to your fire department and gas company.

If the unit constantly shuts off whenever the furnace kicks on and trips the circuit, this is due to an electrical problem. In this case, it is necessary to call an electrician or service professional to take a look at the problem. They will know how to safely fix the issue.

When all inspections and cleaning has been completed. Replace the anything that you removed such as the access panel. Turn the gas line valve back on and return power to the unit. You may need to relight the pilot light as well. Allow your pilot light to continually run. This will keep condensation at bay even when the furnace is not being used. Finally, use your furnace only as much as you need. In the colder months, dress a little warmer so you can set your thermostat lower. Youd be surprised how much you could save over the season by dropping your thermostat a couple of degrees! Also, try turning down the temperature even more when no one is home to maximize your energy savings.

Ensuring Energy Efficiency With Heat Meters

When Terminal 5 was being planned, there was significant environmental opposition and concerns over carbon emissions and the effects on local habitats, including the path of two rivers. When the project was given the go-ahead, these concerns were taken into account and stringent environmental targets were set for every step of the process, both during construction and for the long term future.

The building of Heathrow was a complex project; along with the environmental planning, the entire build had to be completed without any impact on the rest of the activity or infrastructure at the international airport. To achieve this significant construction was undertaken off-site, including the roof, which was partially assembled in Yorkshire and the latest technologies were employed.

When it came to the buildings interior, Terminal 5 utilized high quality fittings that ensured on-going energy efficiency and the minimisation of waste. Temperature control within the expansive interior was an area of focus. The need to regulate the temperature in such a huge space could lead to costly energy consumption, which would not be in keeping with the environmental targets.

The building was designed with large glass windows that allow the terminal to benefit from natural light and heat. To prevent over-heating, the design of the building incorporates areas of natural shade. Additional heating is used, but these design features reduce the requirement and the temperature is carefully monitored and controlled, to ensure energy efficiency.

The Micronics Ultraflo 2000Flow and Heat Meter is one of the fittings used forthis temperature monitoring. The Ultraflo 2000 is a clamp-on, ultrasonic flow meter,created to monitor liquid flow, but with the use of a temperature probe is effective as a heat meter.It has been installed (along with other products) to provide an energy measurement solution. By monitoring and managing the temperature, the Ultraflo 2000 is playing a small part in ensuring that up to 30 million people a day are happy, as well as minimising energy waste.

Terminal 5 is a huge construction, but Micronics flow and heat meters are equally suited to smaller scale buildings too. Creating a comfortable temperature in your business can lead to an enormous bill every month due to the energy consumed. If you want to measure the flow of energy used in your building, whether its a small commercial factory, a shopping centre or a building on the scale of Heathrow airport, installing a heat meter will allow you to monitor and manage the actual physical flow of energy used for heating.

A heat meter will allow you to identify where energy can be channelled more effectively for an improved outcome and reductions in both consumption and cost. The savings made through monitoring and changes can soon cover the cost of installing the heat meter. Many of the heat meters clamp on your pipework and machinery. This means that installing them requires no interruption to your processes and they can easily be removed for maintenance, or when they are used as a temporary measure.

The Ultraflo 2000 is supplied with electronics, sensors and all mounting hardware and also a temperature probe when it is used as a heat meter. Whilst installation is uncomplicated, Micronics have specialist engineers who can come on-site and install heat meters for you as required.

If you want a temporary monitoring solution; either to decide whether to invest in more permanent energy monitoring, or to identify areas of improvement for increased energy efficiency, it is possible to hire portable heat meters from Micronics. This can be ideal for inspections and to help you meet your own industrys environmental targets.

Whether you are planning a new project, or making improvements to an existing building, if energy efficiency and cost reductions are core to your project, Micronics can help you to achieve your goal.

Inexpensive Landscaping Ideas To Improve Your Yard

Are you the one who has the yard all the neighbors talk about? Maybe
your yard stands out for all the wrong reasons? If that is true for
you, turn things around by sprucing up your yard. Here’s some great inexpensive landscaping ideas to improve your yard
to assist you in transforming your yard! Sketching out a design of what
you would like your final landscaping job to look like is a good cheap
landscaping ideas that you will benefit from. You’ll be able to get a
clear idea of the results and the materials needed to achieve those
results. It’s way easier to do a drawing than to actually get physically
started.

Use local plants when fixing your yard. Native plants
are a lot easier to care of because they are already comfortable in
your climate and soil.

A softly curving border can give just the
right bit of focus and eye appeal that your landscape needs. The look
of soft curves is more popular now than the look of straight lines and
sharp corners. It does not cost much to cut fresh edges, and doing so
can transform the look of your flower beds and lawn. Another inexpensive
landscaping ideas to improve your yard is to use local plants when
landscaping. Plants which are native to the area are simpler to maintain
because they have are already used to the climate and soil. This means
that they are low-maintenance. Your local gardening store will be able
to advise you about the types of plants that will thrive in the area
that you live.

Test the pH and composition of your soil before
gardening or starting a landscaping project. This will enable you to
have happier plants as well as having a beautiful garden.


Select plants wisely, because that could seriously affect the result of
your overall landscaping project. It’s no good to wind up with plants
that thrive on sunlight tucked away in the shadiest part of your yard.
Don’t plant a tree in an area where it can’t grow to its full capacity.
The time taken to plan correctly will mean less time fixing mistakes
later. Landscaping encompasses a whole lot more than just planting
trees. To add distinctive beauty with texture, try using different
woods, cement or even wrought iron pieces. Interesting buildings and
structures such as archways, bird baths, gazebos and Pergolas are nice
additions. These things come in various price ranges that can fit
anyone’s budget.

Make the most of your yard look beautiful all
year by growing a garden suitable for many seasons. Select a wide
variety of plants, autumn, according to the region in which you live.


Knowing how to time your purchases at the right time can save you a lot
of money. The best time to buy lumber is during the winter. Buy organic
materials, like shrubs and mulch during the later part of the season.
When new plants become available, wait several years before purchasing
them so that the price is not so high. Landscaping isn’t limited to
experts anymore. Any do-it-yourself homeowner can easily make their yard
look fantastic with some work along with some inexpensive landscaping ideas to improve your yard
front and back. When you are all finished, your neighbors will indeed
be jealous of your new found skills. And isn’t that the result you are
after?

Choose The Best Home Flooring And Office Flooring For Your Building!

While furnishing a house or an office, you must choose the best India Flooring company that provides appropriate options at the best prices. Browse the internet to search for the company that provides innovative and exclusive designs for both home flooring and office flooring.

Tiling is the most important aspect of furnishing that cannot be neglected at any cost. If you are planning to build a new house or renovate an old building, then constructing a good floor is one of the primary concerns. The parquet/floor should be beautiful and aesthetically laid to deliver an attractive appearance to the house. Besides being attractive, it should also be durable enough to withstand the heavy weights of the furniture as well as the pressure exerted while moving.

Nowadays, different kinds of carpeting options are available in the market. The most popular parquet options include different types of materials used for the purpose like wood, vinyl, tiles, lamination, parquet wooden tiling, etc. You can easily choose the most appropriate parquet material for your home or office flooring depending on your personal taste and requirement. The parquet budget is also an important factor to be considered for deciding the most appropriate floor at home, which would not only be durable and economical but also enhance the entire look of the house. However, selecting the ideal home flooring option would be easier if you know the details of the different tiling options available in the market.

No matter what type of home or office flooring you have finally decided to install, if it has not been laid properly by experts, the entire purpose of beautifying the house would fail. It is not difficult to find a reliable company that provides excellent parquet options to suit your requirements, taste and budget, so that you can turn a building into your dream house. You can explore the internet to find a reliable India Flooring company. You will find several options on the internet as the Indian market is flooded with numerous companies providing carpeting options throughout the country. Hence, you are spoiled for choices. But at the same time you might get confused with so many options. Therefore before you decide to approach any company make sure that it has an impressive track record of satisfied clients. Remember even the most expensive options would not look great until and unless it has been laid by experts.

For excellent home flooring and office flooring options you can refer to CCIL, which is one of the most popular India Flooring companies. It provides excellent office and home flooring options to suit the climatic challenges of the country. The expert professionals of the company deliver different floors with world-class finishing and classic style.

A General Overview of ADT Safewatch VideoView Home security Camera Systems

These days, video surveillance technology is indisputably one of the most effectual ways to augment the security of your houses. Since its very advent, it has adeptly mitigated the various security concerns of the people and this is also one of the chief reasons behind its colossal popularity. However, opting for this up to date technology is not at all a trivial issue and hence it is very important that you must take the assistance of some of the veteran and well-known home security solutions providers, such as, ADT.

A Brief Introduction on ADT Video Surveillance System:

ADT video surveillance system is a part of the ADT home security solutions. ADT trained personnel tactically places the cameras in every single corner of your residence and in this way defends the same from all sorts of dangers and misfortunes.

What are ADT Safewatch VideoView home security camera systems?

In addition, with ADT Safewatch VideoView home security camera systems, you can even watch video from any room in the house from any of the connected television or monitor. ADT Safewatch VideoView even allows the users to keep an eye on every single portion of their house through any smart phone or iPad, even while they are traveling abroad.

Diverse Features of ADT Safewatch VideoView:

Secure Viewing: With the advanced data encryption and security features of ADT Safewatch VideoView, now you no longer need to get concerned regarding the protection of your privacy.

ADT Remote Server: ADT remote server competently obtains the video footage from the ADT cameras, which are located in every single corner of your domicile.

See who is standing at Your Door: Furthermore, with ADT Safewatch VideoView home security camera systems, now you can effectively see whos standing outside the door. In this way, you can even verify whether your family members have arrived home safely or not.

Check who is in Your Home: ADT Safewatch VideoView home security camera systems even have the potency to record up to 30 seconds of each triggered event. ADT Safewatch VideoView even plays a significant role in saving up to 30 days of continuous activity with DVR.

Watch your Kids: Whats more, with ADT Safewatch VideoView, you can even keep an eye on every single action of your kid from any of the room in your house.

Keep an Eye on your Home from Anywhere: ADT Safewatch VideoView home security camera systems even enable you to maintain a constant surveillance on both your home and pets even while you are traveling abroad for any kind of business purposes.

Defend Your Property: Last but not the least, ADT Safewatch VideoView even provides you with active email alerts whenever any kind of trouble arises in your home.
Apart from this, ADT video surveillance systems further treats the clients with some of the attractive packages like,

ADT Indoor Camera Package
ADT Camera packages
ADT Multi-Camera Package
ADT DVR Package

All of these ADT video surveillance packages incorporate with some of the additional facilities like, ADT Indoor Color Cameras, ADT Digital Video Recorder etc.

The Increasing Demand For Energy Efficiency In Our Homes

The average new home being built is up to four times more energy efficient than traditional second-hand houses.

New homes are built to incorporate all the latest energy-saving devices and the best insulation. This is great because it means new homes have much lower running costs in comparison to their older counterparts. New-builds offer a more substantial eco-friendly way of living. Older homes can be converted to accommodate the best heating systems or energy-saving technologies out there, but this this could prove very costly. New property developers are able to implement the latest techniques to install in new builds.

There are many ways in which we can save energy and money within our homes. One of the advantages of buying a new build is that you can be guaranteed that certain energy requirements have been met.

The Government requires by law that carbon emissions are cut and one of the ways this can be done is by ensuring that new houses are built to be significantly more energy efficient. Building regulations state that every home which is sold must have an energy performance certificate. This provides the home owner with information regarding how efficient the property is and its potential to be improved. This affects us because the more energy efficient a house is, the lower the running costs will be.

Clearly a lot has changed over the years and without doubt we can expect further changes in terms of how energy efficient our homes can be. As the general public becomes more educated about environmental issues, we can expect an increase in demand for more energy-efficient housing. In fact the trend is already on the rise and builders are responding with technology to meet whatever levels of energy efficiency new buyers might demand.

With the expected growth in innovative, environmentally-friendly technological advancements, we can expect our homes in the future to be much better. With new-build properties you can be sure that the best efforts are being made. Developers are aware buyers can now check energy performance certificates prior to buying new homes, and what they find can affect their decision.
Considerations are heating and hot water, lighting and products within the home such as kitchen appliances. Other aspects are flooring, walls, windows and roofs.

These are exciting times and our homes will be set up to utilise clean energy, save water and ultimately save us financially.