Flat roof repair

When the roofs at Britvic Soft Drinks’ distribution centre in Norwich began to fail, a quick high performance waterproofing and repair system was necessary. Britvic turned to Acrypol, the UK’s leading manufacturer of cold applied acrylic polymer waterproof solutions and coating.

Britvic needed to repair both roofs, as they were suffering from deterioration, including holes causing water ingress to roofing joints. They didn’t want to replace the roofs and were looking for a less costly substitute. It was also critical that the distribution centre stayed operational throughout the repair process to check productivity would not be compromised.

Thanks to a comprehensive repair system supplied by Acrypol, comprising System 15 and Metal-Kote, the two roofs with a combined size of 3,759m2 now look and perform as good as new – at just a fraction of the cost of replacement. For this to be achieved, the specification of Acrypol’s System 15 and Metal-Kote proved ideal with effortless installation processes, both cold-applied over existing surfaces, causing minimum interruption to the business.

As it is appropriate for a eclectic range of applications, Metal-Kote, was specified to allow waterproofing and repairs to the metal surfaces. Metal-Kote was applied straight on to the surface after an thorough pre-application cleaning process of the roofing surfaces, including gutters and joints. It provides a 100% watertight seal that also prevents any existing rust from spreading.

1,725m2 of Metal-Kote was spray-applied to the profiled sheet metal roofing. With one application, it has dramatically enhanced and reinvigorated the tired metal roof, returning Britvic’s roof to its former glory, without the cost or trouble of a roof replacement.

System 15, which comes with Acrypol’s 15 year guarantee, was specified to deliver an unrivalled waterproofing integrity whilst offering convenience, safety and long-term performance. Taking a fraction of the time and cost of other refurbishment and replacement systems, 2,034m2 of the economical, yet highly trustworthy, acrylic waterproofing system was applied to the existing rooftop, roofing joints and 380 linear metres of guttering.

Following the application of Acrypol’s comprehensive roofing repair system, phase one in Britvic distribution centre’s renovation programme is now concluded. Starting from the top the employees of one of Europe’s biggest suppliers will have a workplace that is of the highest standard.

Bathroom Design Ideas For Adding Or Re-modeling A Bathroom

Whatever the design plans that you have, whether you are planning the addition of a new bathroom, improving an existing one, or even trying to design the layout of a bathroom that is part of the new that you are building for yourself, the designs can range anywhere from the utilitarian to the luxurious. Whenever contractors, architects, and interior designers sketch their plans, they will generally follow standard requirements whatever your preferences, so it is always a good idea to know what they are and how they can affect the layout of your entire home. As more people grow into their retirement years, even more special consideration may be put into adding special features to make it easier to move about and get around. There are a number of great sources when it comes to getting ideas for your bathroom, and while they can be tricky to modify or construct, there are always a few tips for getting the design that is just right for you.

Aim for a specific style and stick to it. It isn’t actually a bad idea if you are looking for a country-themed bathroom design in a country-style home, but keeping the overall theme of your home isn’t entirely necessary though. However it can sometimes be better to design the room separately, while keeping the design and layout requirements in mind. A great idea for getting inspiration for your design is to visit some bathroom showrooms. While you do not really need to incorporate all that you see, it doesn’t hurt to make sure that the design of your bathroom is at least slightly pleasing to the eye, and they always feature the latest trends and fashions. When you start making your purchases for the bathroom project, you may find ideas in home design and remodeling magazines, so if you find any you can clip them out and keep them in a scrapbook for reference.

When hiring a contractor or interior designer to design and build your bathroom, there will be certain specifications that they will be inclined to follow. For example, for a user to be properly accommodated, the preferred toilet height should be around 32 to 43 inches. If an individual is to be able to shower properly inside an interior shower room, it should measure at least 36 by 36 inches. Try to consult with a contractor or interior designer first, before making any modifications to an existing bathroom or adding a new on since they can identify the spatial requirements, as well as design a layout for your bathroom that would properly follow any guidelines. In order to prevent your dream bathroom from turning into a health hazard, your design should follow strict building codes. Re-modelers and builders will usually meet with city authorities for updates about the latest requirements before they tackle a bathroom project.

What Are Fireplace Mantel Plinths

Plinths are square block bases traditionally made from stone used as a support for columns of your building and also have existed for years and years ago. They are known to decorate houses of royalty and still widely used even as much as today.

Really should be fact, plinths today are prevalently used not only as bases for statues, pedestals or monuments but you are also employed in many homes to frame doors, windows, cabinets, and fireplaces in order to name just a few, adding some personal touch to ones home interiors.

Generally employed for aesthetic purposes, plinth blocks now are often made available in a variety of materials which range from plaster, concrete, brick, stone, and wood. Those manufactured from wood can be used to trim a door, window, or fireplace are available in lots of wood types like white pine, poplar, oak, mahogany, maple, and cherry. They may be finished, or unfinished, painted or hand carved and are available in a number of designs that may range from intricate carvings with classic patterns to easy and more functional types.

Regarding a fire, a wooden plinth is directly placed directly under either side of the fireplace mantel to serve as footstalls particularly when the inside height of one’s mantel piece needs to be augmented. This technique usually intends to bring more focus on the mantels framing your fireplace; to offer the space a particular appearance brought about by the design of the fireplace mantel. Sold in pairs, most if not completely fireplace mantel plinths currently available are available in pre-cast and ready for installation. More popular types include pearl mantels, mission oak, medium oak, distressed medium oak and cherry finished. Price tags average from $100- $200.

To learn which plinth pair is simply befitting your mantel, you have to measure the “outside leg to outside leg” measurements and you less the interior opening and divide it by 2 to get the width of every leg. You can definitely you aren’t sure relating to this, you might need an expert to measure them for you personally. Though doable for installation, you may want to hire a specialist or observe security precautions when installing.

Atlanta Roofing system

In todays world everyone wants to avail cheaper yet useful facilities. In case of Atlanta water damage is a very common thing you can find in most of the places. That is why one needs to take a lot of care about the roofs and walls. In Atlanta water damage is something that you can always control in a fair budget. Whenever the home owners see any water damages they usually give up. But one must try Atlanta roofing by themselves by insuring their property and opting for other options. If you have any types of property insurance then you need not think about the Atlanta roofing expenses at all. You just need to find out a reliable Atlanta roofing company for the service. You need to check a few Atlanta roofing companies before finalizing with any one.

You can even search online about various Atlanta roofing company and their quotes. Obviously you must not rush to the first company you speak to. That is why internet is a better option for you. You must maintain your roofs properly to avoid future troubles in the roof and walls. You can search for plumber in Atlanta or can organize your ads by Atlanta handyman. If you are giving the ads then you can easily organize all your ads using Atlanta handyman for better result. Your success depends a lot on the ad grouping and management. Otherwise success will surely stay far away from you.

Whenever you are building or renovating your home the first thing you need to take care is the drainage system. The repairing and restoration is very important. If things are not done in a proper way then it can further lead to other troubles. You obviously cannot afford to repair or renovate your home multiple times a year. There are many home owners who do not understand the right time to repair the gutter system and affected by water damage. You will find that the most commonly used material in Atlanta roofing is wood. This is cheap and safe both. If you are planning to renovate then wood is the first thing that you can opt for. Otherwise, there are other materials available but they are little pricy. But if you feel then you can opt for them too. Technology is making a fast progress and that is why nowadays you can check all the material and their pros and cons before opting for anyone.

You also need to check the rates properly various companies offer various rate. You must choose the convenient option from there. It is about your own home and that is why it needs to be the best place for you.

You Have a Roofing Estimate, Now What

Calling contractors and asking for estimates is the easy part; now you need to compare the estimates you received. Always ask for a detailed estimate in writing . It is impossible to make an informed decision if you are not given all of the information. Before you begin your review of the written estimates, call the Contractor references of past customers and have your notes from the ensuing conversation handy as you review each estimate.

Although the bottom line is important, never compare estimates only by the overall cost . As you review your estimate, here are some of the questions you should be asking yourself:

Review Your Roofing Estimate and compare material price vs quality. If the estimate does not contain a detailed breakdown of materials and labor, call the contractor and ask for this information. To bring in the lowest bid, your contractor may have priced your project using a lower quality roofing product which could impact the lifespan of your roof. It is always necessary to weigh the benefits of quality versus price when you are reading estimates. It may be worthwhile in the long run to pay extra now and save hassle a few years down the road.

Also pay close attention to the type of insulation and sealants that are budgeted for your project. Although the cost differential is not high between a thinner insulation product and one with more layers, the quality of the product will directly affect your costs after the roof is installed. If you use a thicker insulation, the amount of heat or cold that seeps into your home will be significantly lessened, thus lowering the amount you will be paying for air conditioning or heat.

Although it is not recommended that you climb up on your roof to measure and determine the amount of material needed, look closely at the estimate from your contractor to make sure they are bidding the correct amount of material. If the contractor has never measured your roof, but offers a decisive amount of materials to be used, ask him to justify his number. Be sure that you are paying for the amount of material you need , and not material that will never be used, or not enough material to complete the job thus running up significant unexpected costs.

If the amount budgeted for labor and “pass-through” costs such as the transportation of materials seems high, dig deeper and determine where the cost comes from. A good contractor will often charge a bit more for labor because he has the extra cost of providing training and salary to quality workmen, but be careful because oftentimes higher cost will equal a higher profit margin for the contractor and not better quality for you.

Ask for customer references and understand the responses you receive from the customer references carefully; these are the people who were so pleased with the contractor they were happy to have their name given as a reference. Have your list of questions handy when you interview a reference, and take notes of their answers.

Take detailed notes as you review each estimate, listing your questions and summarizing the overall bid and response from the customer references for each contractor. Once you finish a detailed review of each estimate, take your notes and compare the estimates . Only then will you be able to get a true comparison of what is being offered.

Do You Know What to do About Your Roof Problems

How long a roof will last is dependent on several controllable factors. The lifespan of a house-top can be extended or reduced depending on the way it is maintained by the homeowner; however, it is a fact that no matter how well it is cared for, at some point the material will deteriorate and risk structure failure. Common signs of structural roof problems include: the presence of granulation; broken shingles; and slipping or cracked shingles. All of this if not detected at an early stage could allow water to penetrate the structure and cause severe damage and premature failure of the entire roof. This top covering of the house is very susceptible to leaking; therefore, homeowners should always practice preventive maintenance and prevent any leaks from starting.

Inspections

Any damage to the integrity of the structure itself can cause susceptibility to water leakage and decay. It is vital to thoroughly inspect the house-top before any major damage occurs. Start the inspection by first checking the interior ceilings for signs of water penetration; this may come in the form of a coffee-colored stain on the ceiling or surrounding walls. Continue the inspection outside by going onto the house-top to check for any indication of structural damage. Look for missing, cracked or loose shingles, granulation, and debris accumulation.

Repairs

After conducting a thorough assessment of this top part of the house and discovering there is a problem with the structure that may require repairs, a homeowner needs to make a decision about the next step. It must be decided if an expert from a roof company is needed to perform the job or if they can make the repairs on their own. It is fairly easy for a homeowner to make minor repairs provided they have adequate knowledge regarding how to perform any required repairs.

Water Leakage

Once water staining has been observed, a leak should be suspected. The first action homeowners should take is to locate the point of water penetration. After locating this spot, a nail should be hammered into the area of the leak. The homeowner should then go outside to look for the area on the roof that needs to be repaired. If the seepage has been caused by loose flashing around a chimney or vent, all that needs to happen is to tighten the flashing with rust-resistant screws. If the cause of the leak is due to damaged shingles, the damaged shingle must be removed and replaced with a new one, ensuring that the replacement tab is larger than the damaged tab. The homeowner must remember to put roofing cement over all nail heads to secure a tight seal.

Cleaning

Sometimes a problem may be caused by the accumulation of debris on the roof or because of an algae infestation. Dark staining on the roof caused by algae can be removed simply by making a bleach solution and spraying it onto the affected area. The solution needs to soak on the area where it has been applied for 15 to 30 minutes before using a soft bristle brush to scrub off the wet section of the roof. Then, the area should be thoroughly rinsed with clear water. Remove pine needles, leaves and twigs from any area that might cause water to back up. Be sure that down-spouts are properly working.

Get Loads of Easy Diy Shed Plans

If you need a storage shed you are probably wondering how to build a shed? If you are good with tools, this will not pose too great a challenge for you. All you need is the right plans to follow for buying and building with. With the wrong plans, this can be a tedious task. In contrast, this will be a simple job if you have the correct plans.

Your first step is of course measure the spot you want to put your shed. Doing this will enable you to determine which size shed you can erect. Once the area and size are determined, it is time for you to buy your DIY shed plans.

After you purchase your plans then you have what you need to know which materials to buy. You need to get all the wood you need to the project. Additionally, you will need a wide variety of tools so make sure you have them all. Your pre-drawn scheme should help.

Once you have all your lumber and tools, you have to chop your wood to size. Having all the wood cut and prepared will shorten the assembly time a great deal.

Your first step is to lay all of the framework on the floor and nail it together. Most people today use nail guns to do this job. After the floor’s foundation is completed, check to see if it is square. At this point, you need to put the boards down for the floor. This is usually sheets of plywood cut to fit. Remember to nail the floorboards securely.

Then, lay out your side supporters and create the framework for each side. Remember to leave an opening for the door. Then place the sheets of plywood in place for the walls and nail in. Now place all outer and inner trim work onto the foundation as is outlined in the blueprint. Each plan differs at this stage though depending on the style of shed.

After the walls are up, it is time to put the rafters and framework up for the roof. Nail them in place while consulting your plans. Next, hem in the shed with your plywood for the roof. Complete any needed trimming for the wood at this point.

Connect both doors by utilizing the proper hardware. Verify that they fit correctly to guarantee they will function properly. There is nothing worse than doors that do not fit right.

Sand and paint your shed whatever color you choose. Be sure to check that you are using outdoor paint, so it will withstand weather conditions. It is a good idea to buy roof shingles for your shed, this is a personal preference and it is not necessary. Naturally, you will need to learn how to do your own shingles before attempting it yourself.

Now that you are an expert in how to build a shed, go purchase your plans. You will save a great deal of money when building you own shed over a ready-built one. You will be filled with a sense of pride each time you glance over at the shed you built on your own. So go and build your shed today!

Self Storage Buildings – Why Steel Structures Are The Best

Self storage buildings made of steel offer benefits to owners as well as customers. More and more people are discovering the cost effectiveness, sturdiness, and eco-friendliness of car storage, boat storage, furniture storage, garage storage, and RV storage facilities built of steel.

Owners

Setting up a self storage business is easy. You can easily find a business loan because this is seen as lucrative, low risk business. Self storage buildings of steel are cheap and easy to construct. You need to invest little, and the returns are high. Business is booming because more and more people understand the advantages of self storage. Therefore, occupancy is high at all times. What is more, self storage is seen as a recession resistant business. People might stop buying homes, but they will always need extra storage space.

Cost of steel self storage buildings is as much as 60% lower than concrete buildings. Steel is weather proof, fire proof, and corrosion resistant. It does not encourage growth of pests and mold. Steel self storage buildings can be easily constructed and expanded. These buildings are low on maintenance. The surface can be painted in attractive colors to resemble concrete, brick, or stone. The cost benefits of steel buildings are passed on to customers.

Customers

If you are looking for extra storage space, a self storage warehouse may be the best answer for your needs. Storage warehouses are safe, fireproof, and pest resistant. Most self storage buildings have foolproof security arrangements such as 24/7 guards, swipe card keys, and fire alarms.

Many steel self storage buildings are constructed from recycled steel. This makes them ecofriendly and acts as an added incentive for environment conscious customers. Self storage can be used for all occasions whenever a little extra space is desirable – for de-cluttering homes, storing inventory and documents, or during relocation.

Homeowners use self storage warehouse during home renovations. The storage facility can hold their belongings until renovations are complete. Moving storage services offer portable storage containers that are delivered to the customer. They can put their belongings in the container and have it sent to the moving and storage facility or to their new destination. Moving storage services offer discounts for storage if customers use their moving service.

Self storage warehouses are located all across the US. Therefore, finding one close to your location is not very difficult. You can select storage units or portable containers from a range of sizes. This helps you save on costs, because rental rates depend on size of the container and facilities such as round-the-clock security, post-business-hours access, and climate control.

Self storage buildings can accommodate every type of item, from large boats, bulky furniture, and heavy home appliances and business equipment to delicate electronic equipment, CDs, documents, and antiques. Steel structures offer additional security to customers and maintenance-free ownership to proprietors.

Various Atlanta Roofing Remedies

It is obvious to change the decoration of your home after few years. For all these gutter cleaning, siding and roofing is very important. In Atlanta, there are plenty of opportunities you can get regarding renovation of your home in affordable price. Roofing is one of the major and costly services and that is why it is very important to choose the proper roof Atlanta service to repair the damages. In this article, we are going to discuss about various facts regarding renovating your home. Atlanta gutter cleaning services and Atlanta siding services can help you to renovate your house easily and without facing much trouble.

The first thing is to clean the gutter. Try to clean your house with power wash once in every year. Dirty gutters can make your home look terrible and all the beauty away from your home. A strong degreaser is very important to clean the gutters properly. If you failed to clean the entire gutter easily then goof off can be used to remove them properly. But if you feel that they are so dirty that nothing can bring back the previous look in it then it is a better idea to replace them with a new one. If you are using degreaser then do not rush. Put the degreaser and then give it some time. After some time remove the gutter and you will get back the cleanness you want.

There are many people who give up immediately after noticing the water damage. But, they must contact the professional immediately after they see the problem. Initially you may just see water leaking and suddenly one day you may have realised that the problem has become much bigger than you have thought. After a storm there are bigger possibilities for your roof to get damaged. You need not start repairing the roof until the storm gets over. You can always opt for a new roof but that means a lot of expenses which is not always affordable. Why investing in to a new roof when little bit of maintenance can solve all your troubles.

You must contact good Atlanta roofing contractors who can provide you the best of the services. Guttering and siding is very crucial parts of your roofing process. The outer covering is known as siding and it protects your roof and the walls from various weather effects. You can opt for Atlanta siding too. Atlanta siding is available in various forms like metal, masonry, wood, plastic and some other composite materials. Steel and copper is popularly used as roofing materials all over. You can zinc covers with steel also. If you want long lasting roof then you must keep a close eye on the ventilation. It plays a crucial part in roof maintenance. If there is no roof ventilation then overheated attics can damage the roof and obviously everyone wants the roof to be protected and safe. Many home owners have some misconceptions regarding the roofing costs. You just need to be a little cautious about the payment, insurances and replacement costs. If you search thoroughly you can find plenty of affordable options for your roofs.

Leeds Roofers Reveals Spotting Roofing Difficulties

One of the most overlooked things when it comes to roofing is simple enough even for the inexperienced eyes of a homeowner. A frequent examination of your roof tiles from whatever height you might be most comfortable with, be that at the floor or up a ladder, with binoculars or not, will ensure that minor jobs don’t come to be household emergencies.

A few roofing problems that tend to be seen are outlined below
The roof structure frame may easily become stressed since , tiles getting porous, they keep water which makes them heavier.

When there is water on your roof this has a chance to freeze and expand and this is likely to cause tiles to become cracked and broken.The stormy English weather is incredibly adept at finding any weaknesses so cracked and damaged tiles are much more inclined to be the weakest link.. Leaks frequently occur where there is a missing or loose tile .
Moss is not good for the longevity of a roof structure since as it grows it may easily lift up the tiles and leave the roof covering exposed to stormy weather. Moss is a cause of a great number of problems on a roofing.. The large volume of water which is stored by moss is one of its major difficulties.In winter moss and the water it holds gets frozen causing damage identified as frost heave and ice dams which results in damage to all areas with the roof top.
Birds tear off the top layer of roof moss, to expose the insects living in it after which discard the moss which usually finds its way into the gutter, and will be the cause of leaks and overflow.. In the worse instances this can easily also be the cause of drainage complications if the material is allowed to get into them.

When the cement comes loose from ridges that is both a would-be hazard due to falling debris as well as leaving the roof top at risk of water getting in . Rain hardly ever falls straight down, the force of the wind blows it in every which way which means that it’s going to get into the gaps and into the roof structure.

Damaged flashings are also the root of many roof troubles. This might be as a result of inadequate fitting or simple weakening of the joints over time.. So check them regularly.
Frequent gutter cleaning will be certain that water runs off effortlessly.